Color Spectrum
Red 780 - 622 nm
Orange 622 - 597 nm
Yellow 597 - 577 nm
Green 577 - 492 nm
Blue 492 - 455 nm
Violet 455 - 390 nm
Color Spectrum
Red 780 - 622 nm
Orange 622 - 597 nm
Yellow 597 - 577 nm
Green 577 - 492 nm
Blue 492 - 455 nm
Violet 455 - 390 nm

HERE IS A GREAT ARTICLE FROM N SCALE MAGAZINE WRITTEN BY BOB KENDALL ON

HOW TO WIRE MANY DIFFERENT TYPES OF LEDS UP AS TURNOUT POSITION INDICATORS

click here for Turnout Position Indicator Article (Adobe Acrobat - .pdf document)

I recommend a subscription to this magazine even if you don't model in N Scale - Lots of good info applicable to any scale

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HERE IS A GREAT ARTICLE FROM N SCALE MAGAZINE WRITTEN BY BOB KENDALL ON

HOW TO WIRE MANY DIFFERENT TYPES OF LEDS UP AS TURNOUT POSITION INDICATORS

click here for Turnout Position Indicator Article (Adobe Acrobat - .pdf document)

I recommend a subscription to this magazine even if you don't model in N Scale - Lots of good info applicable to any scale

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HERE IS A GREAT ARTICLE FROM N SCALE MAGAZINE WRITTEN BY BOB KENDALL ON

HOW TO WIRE MANY DIFFERENT TYPES OF LEDS UP AS TURNOUT POSITION INDICATORS

click here for Turnout Position Indicator Article (Adobe Acrobat - .pdf document)

I recommend a subscription to this magazine even if you don't model in N Scale - Lots of good info applicable to any scale

 

Over 300 different LED Products In Stock - Ready for immediate delivery !

Lower Prices ..........Expert Advice........... Better Selection ..............Faster Service

LEDS FOR MODEL RAILROADERS

Z - N - HO - S - O - G Scale

We dont just sell em - we use em ourselves

ORGANIZED IN THE FOLLOWING ORDER

NEW ITEMS FIRST

then WHITE LEDS FOR LOCOMOTIVE HEADLIGHTS, PASSENGER CAR LIGHTING, AND STRUCTURE LIGHTING

BICOLOR RED / GREEN- TRICOLOR RED/YELLOW/GREEN FOR SIGNALS

SINGLE COLOR LEDS FOR SIGNALS

********* CAUTION *********

TO AVOID BLOWING UP YOUR LEDS BY ACCIDENT

you need to use current limiting resistors when hooking up your leds

click here to learn how to calculate the correct resistor for your application

 

NEW LEDS RECENTLY ADDED

 

3MM WHITE ICE CUBE LEDS

PERFECT FOR LIGHTING MODEL RAILROAD BUILDINGS

Triple Diffused milky white Coating eliminates hot spots normally associated with standard narrow angle leds

pictured below installed on a HO Scale Cement Plant - ( cement plant not included)

the led DOES NOT BLINK AS SHOWN BELOW

The blinking is so you can see how much difference the led lighting makes

Part number 3mwic - 65 cents each or $50.00 per 100

 

 

NEW 3mm AMBER FLASHING and Non FLASHING

( Dcc users can make the non-flashing led flash thru one of the lighting functions)

INVERTED CONE LEDS MAKES THE PERFECT HO SCALE ROTARY BEACON LIGHT OR STROBE FLASHER FOR YOUR LOCOMOTIVES

50 cents each or $37.50 per 100

- 5vdc @ 20ma max

3mm amber flashing part number 3maflic

3mm amber non flashing part number 3manfic

5mm amber flashing part number 5maflic

5mm amber non flashing part number 5manfic

 

also available in 5mm FLASHING AND NON-FLASHING as pictured below

..................................................................................................................................................

RED AND YELLOW 3MM FLASHING LEDS FOR HO SCALE ROTARY BEACON LEDS

 

Thats our Athearn HO Scale F-7 Northern Pacific freight

equipped with our least expensive 5mm white LEDs

5000mcd min 3.6vdc @ 20ma

use a 1k resistor in your locos ( not included)

50 cents each - In Stock - $37.50 PER 100

Here is an N Scale Warehouse being lit by twelve of our

5mm White 7000mcd LEDS

7000mcd min 3.6vdc @ 20ma

use a 1k resistor in your locos ( not included)

50 cents each - IN STOCK - $37.50 PER 100

PART NUMBER 5MW

Here is a our Athearn Switcher with a 3mm white led for a rear light

5000mcd min 3.6vdc @ 20ma

use a 1k resistor in your locos ( not included)

50 cents each - IN STOCK - $37.50 PER 100

PART NUMBER 3MW

LEDS FOR SIGNALS

Bilevel Bicolor RED / GREEN

3mm miniature circuit board indicators - Perfect for Model Railroad Signals O - HO - N Scale

2.2VDC TYP @ 20ma use use a 500 ohm resistor for 12 volts - CLICK HERE FOR COMPLETE SPEC SHEET

50 cents each - IN STOCK

PART NUMBER 32FRG

 

3mm BIPOLAR BICOLOR IN HOUSING

THESE ARE AMAZING - GET 3 SEPERATE COLORS USING AC AS SHOWN BELOW

 

BIPOLAR 2 LEAD MILKY WHITE LENS IN OFF STATE

2.0-2.2VDC 20 MA 60 DEGREE VIEWING ANGLE - use 500 ohm resistor for 12 volts

50 cents each - $37.50 per 100

PART NUMBER 37RGH

Bipolar Bicolor 3mm

Milky White lens in off state - Changes from Red to Green when you reverse the 2 leads

Perfect for HO and larger scale Dwarf Signals - Simple hookup to your track so your trains always move forward into green signals, and never against the red. - Helps you correctly wire and switch reverse loops and wye arrangements

2.2v typ 20ma - use a 500 ohm resistor for 12volts - CLICK HERE FOR COMPLETE SPEC SHEET

50 cents each - In Stock - $37.50 per 100

PART NUMBER 37M

Bipolar Bicolor 5mm

Milky White lens in off state - Changes from Red to Green when you reverse the 2 Leads

Perfect for HO and larger scale Dwarf Signals - Simple hookup to your track so your trains always move forward into green signals, and never against the red. - Helps you correctly wire and switch reverse loops and wye arrangements

2.2v typ 20ma - use a 500 ohm resistor for 12volts

50 cents each - In Stock - $37.50 per 100

PART NUMBER 58M

Bipolar Bicolor 5mm Right Angle Housing

Milky White lens in off state - Changes from Red to Green when you reverse the 2 Leads

Perfect for HO and larger scale Dwarf Signals - Simple hookup to your track so your trains always move forward into green signals, and never against the red. - Helps you correctly wire and switch reverse loops and wye arrangements

2.2v typ 20ma - use a 500 ohm resistor for 12volts

50 cents each - In Stock - $37.50 per 100

PART NUMBER 50M

 

Bipolar Bicolor 5mm Right Angle Housing 3 leads

Changes from Red to Green when you reverse the wiring - Milky White lens in off state - 3 Leads

Perfect for Model Railroad Signals - HO and Larger scales - Fits Atlas HO & N Scale Track Bumpers perfectly - Great for wiring TURNOUT POSITION INDICATORS -

2.2v typ 20ma CLICK HERE FOR COMPLETE SPEC SHEET

50 cents each - In Stock - $37.50 per 100

PART NUMBER 59M

 


RED 5mm Right Angle LED in housing

Perfect for Model Railroad Signals O - HO - N Scale

Fits Atlas HO & N Scale Track Bumpers perfectly - Plus lots of other uses

2.2vdc 20ma - use a 500 ohm resistor for 12 volts

CLICK HERE FOR COMPLETE SPEC SHEET

50 cents each - In Stock - $37.50 per 100

PART NUMBER 48DR

 

SINGLE COLOR LEDS

2mm Axial leaded LED RED

These are the leds you typically see used by the manufacturers of brass HO Scale Signals

2 VOLTS 20MA - use a 500 ohm resistor for 12 volts

30 CENTS EACH - In Stock - $25.00 per 100

PART NUMBER 2MAXRD

 

2mm Axial leaded LED YELLOW

These are the leds you typically see used by the manufacturers of brass HO Scale Signals

2 VOLTS 20MA - use a 500 ohm resistor for 12 volts

30 CENTS EACH - In Stock - $25.00 per 100

PART NUMBER 2MAXYL

2mm Axial leaded LED GREEN

These are the leds you typically see used by the manufacturers of brass HO Scale Signals

2 VOLTS 20MA - use a 500 ohm resistor for 12 volts

30 CENTS EACH - In Stock - $25.00 per 100

PART NUMBER 2MAXGN

 

Part # 3RD

3mm red diffused lens

use a 560 ohm resistor for 12 volts

SPECIFICATIONS:
SOURCE MATERIAL:InGaN
EMITTING COLOR:RED
LENS TYPE:Red Diffused
LUMINOUS INTENSITY-MCD:20MCD TYPICAL
REVERSE VOLTAGE:2.7 V
DC FORWARD VOLTAGE:1.7V TYPICAL
DC FORWARD CURRENT:20mA
VIEWING ANGLE:15

25 cents each

$20.00 per 100

$50.00 per 1000

In Stock

     

 

Part # 5RD

5mm red diffused lens

use a 560 ohm resistor for 12 volts

SPECIFICATIONS:
SOURCE MATERIAL:InGaN
EMITTING COLOR:RED
LENS TYPE:Red Diffused
LUMINOUS INTENSITY-MCD:20TYPICAL
REVERSE VOLTAGE:2.7 V
DC FORWARD VOLTAGE:1.7V TYPICAL
DC FORWARD CURRENT:20mA
VIEWING ANGLE:15

25 cents each

$20.00 per 100

$50.00 per 1000

In Stock

     

 

Part # 3GD

3mm Green

Diffused Lens

SPECIFICATIONS:
EMITTING COLOR:GREEN
LENS TYPE:Green Diffused
LUMINOUS INTENSITY-MCD:20MCD TYPICAL
REVERSE VOLTAGE:2.7 V
DC FORWARD VOLTAGE:2.5V TYPICAL
DC FORWARD CURRENT:20mA
VIEWING ANGLE:15

25 cents each

$20.00 per 100

$50.00 per 1000

In Stock

     

Part # 5GD

5mm Green

Diffused Lens

SPECIFICATIONS:
EMITTING COLOR:GREEN
LENS TYPE:Green Diffused
LUMINOUS INTENSITY-MCD:20MCD TYPICAL
REVERSE VOLTAGE:2.7 V
DC FORWARD VOLTAGE:2.5V TYPICAL
DC FORWARD CURRENT:20mA
VIEWING ANGLE:15

25 cents each

$20.00per 100

$50.00 per 1000

In Stock

     

Part # 3YD

3mm Yellow

Diffused Lens

SPECIFICATIONS:
EMITTING COLOR:Yellow
LENS TYPE: Yellow Diffused
LUMINOUS INTENSITY-MCD:20MCD TYPICAL
REVERSE VOLTAGE:2.7 V
DC FORWARD VOLTAGE:2.5V TYPICAL
DC FORWARD CURRENT:20mA
VIEWING ANGLE:15

25 CENTS EACH

$20.00 PER 100

IN STOCK

Part # 5YD

5mm Yellow

Diffused Lens

SPECIFICATIONS:
EMITTING COLOR:Yellow
LENS TYPE: Yellow Diffused
LUMINOUS INTENSITY-MCD:20MCD TYPICAL
REVERSE VOLTAGE:2.7 V
DC FORWARD VOLTAGE:2.5V TYPICAL
DC FORWARD CURRENT:20mA
VIEWING ANGLE:15

25 CENTS EACH

$20.00 PER 100

IN STOCK

 

 

NO MINIMUM ORDER

www.MoreLEDS.com is a trademark of Quickar Electronics, Inc.

Entire web site including images Copyright 2010 Quickar Electronics, Inc.