Color Spectrum
Red 780 - 622 nm
Orange 622 - 597 nm
Yellow 597 - 577 nm
Green 577 - 492 nm
Blue 492 - 455 nm
Violet 455 - 390 nm
Color Spectrum
Red 780 - 622 nm
Orange 622 - 597 nm
Yellow 597 - 577 nm
Green 577 - 492 nm
Blue 492 - 455 nm
Violet 455 - 390 nm

..Over 300 different LEDS In Stock - Ready for immediate delivery !.....

NEW PRODUCTS - ARRIVING SOON

BRAND NEW PRODUCT

QUICKAR ELECTRONICS EXCLUSIVE

DESIGNED IN COOPERATION WITH DIGITRONICS R & D

75 watts per channel - 3 CHANNEL PWM CONTROLLER KITS

for high powered leds like 1watt 3watt and 5 watt Luxeon Stars, Cree X-Lamps - 1 watt and 3 watt UFO's and Apollos and other high powered leds

THE PERFECT CONTROLLER FOR RGB ( red green blue) FULL COLOR CONTROL OF LEDS

LIKE OUR NEW 1 WATT RGB UFO LEDS - 3 COLORS IN ONE LED !

COMBINED WITH THIS 3 CHANNEL PWM CONTROLLER KIT

YOU CAN HAVE 24 MILLION COLORS

AT YOUR DISPOSAL

3 CHANNEL PWM CONTROLLER KITS $24.95 EACH

FULLY ASSEMBLED AND TESTED (LIMITED TIME ONLY) $29.95

Kits contain all parts, instructions, schematic diagram

You will have to follow the assembly instructions and solder the parts onto the supplied circuit board, and provide a suitable power source ( like an inexpensive "Wall Wart" type ac to dc transformer)

RATED FOR 75 WATTS PER CHANNEL

and thats without any heatsinks or forced air cooling which would dramatically increase the ratings

see the notes below from Michael the Chief Design Engineer:

Ran Two Units near 24hrs each yesterday, No Drama! With 17Vdc Input And 9.0Amps Output! (3amps per channel)
((NO Customer "Wall-Wart" Can Supply over a couple amps!)) Equating to 150Watts Total Control, Or 50Watts Per Channel, Without any heatsinks needed or overload.

This is consistent with the Data Specifications for The IRF 530 TMOS Power
Output FET supplied in each kit. IRF 530's are rated for a max.
"Package Dissipation" of 75Watts each and show ratings of
100V @ 14Amps. continuous, Drain/Source @ 56Amps. Peak!

Actually the LIST PRICE of the "FET's & Precision Bourns Pots" Supplied in each Kit Exceeds $25.00 WOW!!

(And Of Course The Most Expensive Part IS..... The Ckt. Board!!!)

No one else would attempt to sell a $40 Kit for $24.95, it's just Crazy!

Thank you Michael, Yes, we are CRAZY ABOUT LOW PRICES, GOOD BARGINS, AND STATE OF THE ART , CUSTOM MADE PRODUCTS AVAILABLE NOWHERE ELSE!

ALSO AVAILABLE

( and selling like crazy - 100+ units per month - some people have came back and bought em 3 at a time)

OUR VERY AFFORDABLE 20 WATT SINGLE CHANNEL PWM CONTROLLER KIT

ONLY $9.95 EACH

 

MORE NEW ELECTRONC KITS

FROM QUICKAR ELECTRONICS

( please note these are kits and you will have to put the right parts in the right places and solder them together and provide a power source)

ML807 - Variable Power Supply

adjustable from 0-12VDC @ 500ma ( shown assembled)

PERFECT FOR THOUSANDS OF ELECTRONIC PROJECTS AND ITEMS


• A basic regulator that can be considered as a best buy power supply
• Adjustment through variable resistor or normal volume control.
• Power supply : any 120vac to 12vdc 500ma or less transformer will work (not included)
• PCB dimensions : 1.3” X 1.2”

$5.95

ML915 - LOW VOLTAGE BATTERY ALERT (shown assembled)


• Lets you know when your battery is getting weak and needs to be recharged by an audible alarm

. Perfect for boats, cars, solar panels, rechargeable batteries, etc...
• This circuit can be adjusted 7.8-12 volt by adjusting at variable resistance.
• Normally 10 volt adjustment is suggested for 12 volt battery.
• PCB dimensions : 1.9” X 1.5”

$7.95

ML148 - 4 WAY 3 COLOR TRAFFIC LIGHT KIT

Traffic light 4 way 12 LEDs is running light circuit.
• The shape is the same traffic light at the intersection.
• This circuit is consist of 12 LEDs.

LEDS CAN BE EXTERNALLY MOUNTED AWAY FROM THE BOARD IF DESIRED BY JUST RUNNING SOME EXTRA WIRING


• Idea as light-shows for model construction etc.
• Power supply : 9-12 VDC.(not included)
• PCB dimensions : 1.3” X 3.6”

$10.95 iNCLUDES 12 - 5MM LEDS ( ADD $2.00 FOR 12 - 2MM OR 3MM LEDS )

ML144 DC CHASING LIGHT 6 PROGRAM (4CH. 12V. 100W.)

• This circuit requires a 12 vdc power supply ( not included)

6 DIFFERENT PATTERNS/ FUNCTIONS:

1......light run from 1st to 4th ranking and then return from 4th to 1st again after all lamp is light on.
2 .....light runs from 1st to 4th after all lamp is light on.
3 .....flash light runs between 1st , 3rd, and 2nd, 4th.
4. .....light runs from 1st to 4th and then return from 4th to 1st again.
5. .....light runs from 1st to 4th ranking and then return from 4th to 1st again after all lamp is light off.
6. .....light runs from 1st to 4th ranking and restarts at 1st ranking again.

Led indicators for channel on indication -
• This circuit can power 25Watts of incandescent bulbs or LEDS ( not included) per each channels of 4 total channels for a total 100-Watts maximum.
• PCB dimensions : 3.5” X 2.7”

$14.95

2 RED ALTERNATING LEDS KIT

ML109 2 ALTERNATING LED FLASHER KIT

MAKES THE PERFECT MODEL RAILROAD CROSSING LIGHT

ELECTRICAL INPUT 6-9VDC

INCLUDES INSTRUCTIONS ON HOW TO ASSEMBLE THE KIT,

PLEASE NOTE: THIS IS A KIT, AND YOU WILL HAVE TO INSERT COMPONENTS INTO THE CORRECT HOLES AND SOLDER THEM IN PLACE

however it is an easy kit to assemble even for beginners

easy to assemble

10 LED SEQUENTIAL RUNNING LIGHT KIT

WITH ADJUSTABLE SPEED CONTROL

10 red and green leds light up one after another in a straight line

This is a kit that requires you have a soldering iron, and can do basic soldering of components to a circuit board. You also must provide a power source for the circuit yourself. This can be a simple ac to dc wall type transformer, that you probably have laying in a closet somewhere.

WE PUT ONE TOGETHER FOR OURSELVES AND MADE SOME MODIFICATIONS

WE SUBSTITURED A POT WITH WIRE LEADS FOR THE FACTORY TRIM POT

AND WE DIDNT USE THE LEDS SUPPLIED WITH THE KIT, WE USED OUR BEST WHITE GREEN AND BLUE ULTRA BRIGHT LEDS, AND MOUNTED IT ON A LITTLE BLOCK OF WOOD AS PICTURED BELOW

click here for movie

SORRY THESE ARE SO NEW THEY ARE NOT IN OUR SHOPPING CART SYSTEM

PLEASE CALL OR EMAIL TO ORDER

To Place an order call our Toll Free number or email sales@moreleds.com

Sorry, Minimum $20.00 order - $15.00 merchandise $5.00 shipping

www.MoreLEDS.com is a trademark of Quickar Electronics, Inc.

Copyright 2004 Quickar Electronics, Inc.